Code-
No. |
Name
and
Discription |
Colour |
Application |
Temperature
° C |
Coeff.
Frict. |
Wear
Factor |
 |
| 01 |
Jaeger
01
PTFE |
white |
Excellent
for light dynamic and static service. Low gas permeability.
Good cryogenic properties. FDA approved. |
-260 up
to +200 |
0,09 |
10.000
high |
|
| 02 |
Jaeger
02
PTFE Premium |
blue |
Similar
properties as Code 01but with improved wear resistance.
|
-260 up
to +200 |
0,09 |
150 |
|
| 03 |
Jaeger
03
PTFE/Carbon/Graphit |
black |
Excellent
material for heat and wear resistance. Recommended for
dry and poorly lubricated applications, suitable in water
and steam service. |
-260 up
to +300 |
0,09 |
10 |
|
| 04 |
Jaeger
04
PTFE/Glass/MOS2 |
grey
black
|
Recommended
for high pressure hydraulic service, steam and water.
Abrasive against soft metal in dynamic applications under
high pressure. |
-200 up
to +260 |
0,08 |
10 |
|
| 05 |
Jaeger
05
PTFE/Carbon/Graphit |
black |
Similar
to code 03 but increased wear resistance. Excellent in
steam and water under severe conditions. Very good extrusion
resistance at high temperature.
Excellent for back-up
rings. |
-250 up
to +320 |
0,10 |
6 |
|
| 06 |
Jaeger
06
PTFE/Premium |
black |
Excellent
for extreme dynamic conditions. Combinations as high temperature,
pressure, speed, dry running. Excellent in water and water
based solutions. Abrasive runnings against soft metals. |
-250 up
to +300 |
0,09 |
1 |
|
| 07 |
Jaeger
07
PTFE/Bronze |
brown |
Good
abrassive resistance. Excellent in hydraulic applications.
Good for high pressures.
Not recommended for rotary
applications. |
-150 up
to +290 |
0,08 |
5 |
|
| 08 |
Jaeger
08
PTFE/Polyester |
tan |
Special
compound for high temperatue applications. Recommended
for low and medium speed application running against soft
metals. |
-240 up
to +300 |
0,13 |
4 |
|
| 09 |
Jaeger
09
Ekonol® filled PTFE |
brown |
Special
compound with superior heat and wear resistance characteristics.
Non-abresive. Recommended for low to high speed applications
running against soft metal.
Not good in water. |
-250 up
to +300 |
0,15 |
3 |
|
| 10 |
Jaeger
10
UHMW-PE |
white |
Excellent
wear material but limited heat and chemical resistance.
Excellent for cryogenic temperatures.
FDA approved. |
-250 up
to +80 |
0,11 |
4 |
|
| 11 |
Jaeger
11
PTFE/Glass/MOS2 |
grey
black |
Similar
to code 04 but softer for improved sealing at lower pressure.
Can be abrasive running against soft metals. |
-250 up
to +300 |
0,09 |
1 |
|
| 12 |
Jaeger
12
PTFE/Graphit |
black |
General
purpose material with good heat and wear characteristics.
Good in water, non-lubricating fluids and compatible with
all hydraulic fluids and most chemicals. |
-250 up
to +300 |
0,09 |
2 |
|
| 13 |
Jaeger
13
PEEK |
brown |
High
modulus material with excellent high temperature resistance.
Excellent for backup rings only. |
-70 up
to +250 |
n/a |
n/a |
|
| 15 |
Jaeger
15 |
white |
Meets
FDA requirements. Good heat and wear resistance. Suitible
for soft metals. |
-250 up
to +300 |
0,11 |
3 |
|
| 17 |
Jaeger
17
15%Glass
Filled PTFE |
white |
Typically
used for backup rings. Abrasive in dynamic applications
running against soft metal. |
-200 up
to +270 |
0,10 |
3 |
|
| 21 |
Jaeger
21
Moly Filled PTFE |
dark grey |
Typically
used in dynamic vakuum applications and in rotary duty
in electronics industrie. |
-200 up
to +250 |
0,09 |
10 |
|
| 22 |
Jaeger
22
Modified PTFE |
white |
Excellent
for static applications, particularly good in cryogenic
duty using thin gases. FDA approved. |
-260 up
to +230 |
0,09 |
10 |
|
| 23 |
Jaeger
23
Carbon /Peek
Filled PTFE
|
dark tan |
Useful
high pressure and high temperature material. |
-120 up
to +300 |
0,10 |
5 |
back
to overview